Pressure gauge 10 bar, 3-150 PSI AMIO-02940, AMiO

Top quality digital tyre pressure gauge for cars, motorbikes etc.

Adapted to standard car valves.

CHARACTERISTICS:

• Replaceable, lithium battery LR44- 2pcs (included).
• Measuring range 0.3–10 bar, 3–150 psi
• No calibration required.
• Excellent repeatability of measurements, unattainable with analogue pressure gauges.
• Digital, easy to read display.
• Special profile for easy measurement, even on non-standard alloy wheels.
• High calibration accuracy of measurement +/- 2%.
• Energy-saving.
• The offered pressure gauge has 3 different measurement units for tyre pressure - psi, bar

Check the manufacturer's recommended tyre pressure specifications.

• Press the ON button. The display will show 8.8.8 along with 4 units: psi, bar, kpa and kg/cm2.
• The next step will show 0.0psi or 0.00bar or 0.00kg/cm2 or 0kpa.
• You can now press the ON button to change units (psi>bar>kpa>kg/cm2).
• Place the meter nozzle on the tyre valve. Press firmly to ensure no air escapes. Wait 1-2 seconds, remove the nozzle from the valve and read the tyre pressure on the LCD display. Repeat the operation on the other tyres.
• The display will remain illuminated with the pressure reading for approximately 20 seconds. The pressure gauge will then switch off automatically to save energy.
• The pressure gauge can be manually switched off by pressing the ON button for approximately 3 seconds.

NOTE: You can continue to use the manometer even though the previous reading is still displayed.

• If you observe a low battery symbol on the display - Power has been depleted.
• If you observe an unusually low reading: Make sure you do not hear the sound of escaping air. Also ensure that the pressure gauge is correctly fitted to the valve stem.
• If the tyre pressure is too high in either tyre, slowly deflate the tyre by gently pressing on the tyre valve with the edge of the pressure gauge.
• Use a soft, damp cloth to clean the pressure gauge. Do not immerse in water or spray with water or any other liquid cleaner.

WARNING: For best results, check tyre pressure when tyres are cold. Prolonged driving at high speeds can cause the tyre pressure to rise. Taking pressure readings at this time may give a false result. Check the tyre pressure at least once a week and top up the air if necessary. Refer to your car's owner's manual for recommended tyre pressures. This gauge is intended to provide a guide to help determine the drop in tyre pressure. Only advanced and regularly calibrated measuring devices can provide completely accurate readings.