Filament PLA light gray 1.75mm 1kg refill Rosa3D
Pickup at the LEMONA electronics store within 2 hours (if the item is in the store and the order is placed before 3 p.m.)
 Not available | Vilnius Žirmūnai Store |
| Not available | Vilnius Naujamiestis Store |
| Not available | Kaunas Store |
| Not available | Klaipėda Store |
 2 pcs | Šiauliai Store |
| 4 pcs | Central Warehouse (new location) |
Home delivery in Lithuania 1-2 b.d.
Delivery to pickup location 1-2 b.d.
Delivery terms
Pickup In Store
Pickup In Store For free
Quantity in shop
| Not available | Vilnius Žirmūnai Store |
| Not available | Vilnius Naujamiestis Store |
| Not available | Kaunas Store |
| Not available | Klaipėda Store |
| 2 pcs | Šiauliai Store |
| 4 pcs | Central Warehouse (new location) |
Home delivery in Lithuania
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €30.00 (Orders up to 1000 kgs) | For free |
To €30.00 (Orders up to 3 kgs) | €2.99 |
To €30.00 (Orders up to 1000 kgs) | €3.59 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€1.99
Product description
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.
PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.
Printable model for refill spool sides you can download here:
Recommended printing parameters:
- extrusion temperature 185-225°C
- bed temperature: 40-60°C
- fan: 50-100%
- print speed: 60-80 mm/s
The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.
PRODUCT PARAMETERS
- Color: light grey
- Diameter: 1.75 mm
- Weight: 1000 g (vacuum packed) refill packing without plastic spool
- Density: 1.24 g/cm3
- Odor: odorless
- Heat deformation temperature: 55°C (ASTM E2092)
- Diameter tolerance: +/- 0,05
- Oval tolerance: +/- 0,05
- Tensile elongation: 6 %
- Tensile strength (to break): 53 MPa
