Filament FiberSmooth gray 1.75mm 0.5kg (smoothing with IPA) Fiberlogy
Pickup at the LEMONA electronics store within 2 hours (if the item is in the store and the order is placed before 3 p.m.)
 1 pcs | Vilnius Žirmūnai Store |
| 2 pcs | Vilnius Naujamiestis Store |
| 2 pcs | Kaunas Store |
| 2 pcs | Klaipėda Store |
| 1 pcs | Šiauliai Store |
| 1 pcs | Central Warehouse (new location) |
Home delivery in Lithuania 1-2 b.d.
Delivery to pickup location 1-2 b.d.
Delivery terms
Pickup In Store
Pickup In Store For free
Quantity in shop
| 1 pcs | Vilnius Žirmūnai Store |
| 2 pcs | Vilnius Naujamiestis Store |
| 2 pcs | Kaunas Store |
| 2 pcs | Klaipėda Store |
| 1 pcs | Šiauliai Store |
| 1 pcs | Central Warehouse (new location) |
Home delivery in Lithuania
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €30.00 (Orders up to 1000 kgs) | For free |
To €30.00 (Orders up to 3 kgs) | €2.99 |
To €30.00 (Orders up to 1000 kgs) | €3.59 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€1.99
Product description
PERFECTLY SMOOTH FINISH
FiberSmooth is a material from the PVB family. Its greatest advantage is the ease of processing, which involves smoothing it with
isopropyl alcohol (IPA). The model immersed in the liquid or exposed to its vapors is partially dissolved, thanks to which the outer contours better bond with each other and hide the boundaries of the layers. At the same time, the entire model acquires a porcelain-like, shiny surface. In the case of transparent colors and the colorless version, it is easy to obtain almost completely transparent walls.
3D printing with FiberSmooth can be compared to PLA. It is a print-friendly material and it’s perfect for novice printers. However, it is necessary to keep in mind that the adhesion between the layers is weaker, so we recommend a higher bed temperature in order to prevent the model from warping. PVB has low shrinkage and is odorless.
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
| Nozzle Temperature | 215-225°C |
| Bed Temperature | 75°C |
| Closed chamber | not required |
| Fan | 75-100% |
| Flowrate | 90-100% |
| Printing Speed | < 100 mm/s |
| Surface | glass, masking tape |
| Retraction (direct) | yes, 1-2 mm |
| Retraction (bowden) | yes, 2-3 mm |
| Retraction Speed | 20-45 mm/s |
