Charger for Lead-Acid 12/24V 10-300Ah 10A
Pickup at the LEMONA electronics store within 2 hours (if the item is in the store and the order is placed before 3 p.m.)
 1 pcs | Vilnius Žirmūnai Store |
| 3 pcs | Vilnius Naujamiestis Store |
| 5 pcs | Kaunas Store |
| 6 pcs | Klaipėda Store |
| 4 pcs | Šiauliai Store |
| >20 pcs | Central Warehouse (new location) |
Home delivery in Lithuania 1-2 b.d.
Delivery to pickup location 1-2 b.d.
Products purchased together
Delivery terms
Pickup In Store
Pickup In Store For free
Quantity in shop
| 1 pcs | Vilnius Žirmūnai Store |
| 3 pcs | Vilnius Naujamiestis Store |
| 5 pcs | Kaunas Store |
| 6 pcs | Klaipėda Store |
| 4 pcs | Šiauliai Store |
| >20 pcs | Central Warehouse (new location) |
Home delivery in Lithuania
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €30.00 (Orders up to 1000 kgs) | For free |
To €30.00 (Orders up to 3 kgs) | €2.99 |
To €30.00 (Orders up to 1000 kgs) | €3.59 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€1.99
Product description
Everactive CBC-10 v2
digital, fully automatic.
"The EverActive CBC10 is a universal charger / so called "intelligent charger" for all types of acid batteries (automotive, etc.) 12V and 24V, gel / AGM.
The NEW SKAITMEN TECHNOLOGY is small size, higher reliability, higher efficiency, lower power consumption.
The maximum (adjustable) charging current of 12V batteries is 10A - enough to charge for 10-20min tostart a car with a dead battery!
Direct from an energy specialist:
24 months warranty
The charger is intelligent, controlled by a microprocessor - when fully charged, it automatically switches off, going into voltage monitoring mode - 100% safe for each battery.
The efficiency of our charger is comparable to the charging process in leading professional equipment (even many times more expensive) - theuse of an intelligent charger does not adversely affect the performance of the battery, on the contrary, it prolongs its life!
The charger is not only designed for high-capacity car batteries - thanks to the regulation of the charging current, it is also suitable for gel batteries, motorcycle batteries for yachts, or smaller capacity scooter batteries.
Unlimited possibilities - our charger features a unique, detachable cable with SAE quick connector, allowing you to adapt the charger to your device without problems when the included crocodile clips and loop clamps are not enough.
The charger uses modern solutions:
- Automatic and reliable battery charge management - either when a certain voltage is reached or automatically when the charging current drops,
- Voltage monitoring at the end of charging - automatic resumption of charging when the battery voltage drops, including inthe event of a power failure from the AC grid,
- the charger eliminates battery sulphation that can occur during charging,
- maintenance mode for 12V / SLA batteries with a capacity of 14-230Ah - the charger provides a constant voltage of 13.6V at up to 5A - keeps the battery fully ready - ideal for electric vehicles, forklift trucks etc.
- 13.6V / 5A power mode - can power appliances powered from 12V.
- "Winter mode - guarantees full and efficient charging of the battery even at very low ambient temperatures.
- "revive/refresh " mode - special charging mode - in case of very low batteries, the charger uses a reduced charge 1.The charger itself decides whether to use this mode,
- adetachable cord with SAE quick-connect type allows you to customise the charger to suit your needs, with crocodile clips and loop clamps as standard equipment,
- a charger with protection against short-circuiting, incorrect polarity connection, overheating, overload, etc.
The CBC 10 charger is suitable for 12V / 24V gel, lead-acid, AGM, VRLA, VLA, SLA, WET, GEL, lead-acid batteries.Charging mode ,13 LEDs indicate the charger operation .
The first stage is the automatic detection of the battery type (12/24V) and its possible reactivation (only for deeply discharged cells) - recharging with reduced current.
The second phase is the main charging - depending on the mode, charging current 10A / 5A / 2A (for 24V batteries the maximum current is 5A).
The next steps are to control the charging process - as the battery voltage increases, the charging current changes (automatic limitation): 10A-7.5A-5A-4A-3A-2A-1.5A.
In the last stage of charging, the current is limited to 1.5 A, which is an excellent protection against the phenomenon of "gassing" of the battery. When the voltage reaches 14.4V (12V batteries) and 28.8V (24V batteries), charging is complete.
The last phase is the battery voltage monitoring phase - leaving the charger connected to the battery for a longer period of time and the voltage drops to 12.8V (12V) / 25.6V (24V), the charger switches on a 1.5 A current charge to prevent the battery from discharging.
| Technical data | |
| Input voltage | 220-240V AC, 50-60Hz |
| Supported batteries | Automatic 12V/24V DC Gel, lead acid, AGM, VRLA, VLA, SLA, WET, GEL, lead acid detection |
| Supported battery capacities: | 10-300Ah 12V, 10-150Ah 24V |
| Typical efficiency | > 75-80% |
| Charging voltage | 14.4V / 14.7V for 12V batteries, 28.8V / 29.4V for 24V batteries |
| Charging current | adjustable 10/5/2 [A] 12V adjustable 5/2 [A] 24V |
| Operating temperature | -10..40 C (power limitation at higher temperatures) |
| Dimensions | 22 x 8,2 x 5,6 [cm] |
| Other | Built-in fan, length of AC cord approx. 1.8 m, total length of connections (with crocodile clips or eyelets) approx. 1.8 m |
| Including | "everActive CBC-10 v2 automatic charger, User manual PL / LT / DE, connection with crocodile clips, connection with loop clamps |
The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].
